This product is not a medical device and is not intended to assist, treat, diagnose, or alleviate any medical condition or disability.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are:
|Weight Capacity||250 lbs.|
|Per-Charge Range3,6||Up to 10.3 miles at 250 lbs.; Up to 12.2 miles at 200 lbs.|
|Standard Seat Size||14.75” x 13.5”|
|Seat to Ground Range||18”-20”|
|Speed||Up to 3.7 mph|
|Overall Weight||46.5 lbs. with seat and batteries|
|Front Tires solid||6.5” solid|
|Rear Tires solid||6.75” solid|
|Number of Wheels||3|
|Warranty||5-year limited on frame;
13-month limited on electronics;
13-month limited on drive motors
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.